Mirror Isles · Creator’s Room 10

Two mirrors above a row of three circles

Match the two upper mirrors and the lower row of three circles. The lower island’s north protrusion, side shores and uneven southern edge are useful landmarks.

A long upper island has a narrow central bar, a southeast lobe and mirrors towards its two ends. The large island below has three gold circles in a row, a northern central protrusion and a right-hand shelf.
A long upper island has a narrow central bar, a southeast lobe and mirrors towards its two ends. The large island below has three gold circles in a row, a northern central protrusion and a right-hand shelf. Enlarge image

Different layout? Compare the other Mirror Isles rooms.

Mirror Isles rooms27 guides

Find a different board →

Choose how much help you want

Stop after any hint. The full route and later-state picture stay hidden until you open them.

Hint 1What to notice

The mirror setup can create two solid copies, then a later interaction increases the lower-island group to three.

Hint 2What to set up

The copies share directional movement. Use the north protrusion and different shore stops to change their spacing.

Hint 3The decisive move

After spreading the copies near the north protrusion, follow west–south–east–south. The rightmost copy is still held on its raised shelf: move west off that shelf, then south to join the bottom row before aligning below the circles.

Open the full routeSolution spoilers and the target state
  1. Set both upper mirrors

    Go around the western mirror’s north side and push it south onto the upper island’s bottom western row. Cross east and move the eastern mirror east to the island’s far right edge. Both mirrors now share a horizontal light row; their downward strips reach the lower far-west lip and the lower right shelf.

  2. Make two copies and return one upstairs

    Use the mirror interaction from the upper light to create solid copies at the lower far-west lip and right shelf. Move west together: the western copy is stopped at its shore while the right-hand copy crosses the lower island’s upper part to a position north of the leftmost gold circle. On the western mirror’s downward light strip at the far-west shore, use the mirror interaction to return that western copy to the upper bar between the two mirrors. The other solid copy stays north of the lower island’s leftmost gold circle.

  3. Create the third lower copy

    The upper solid copy again has two pale lower landings. Use the mirror interaction there: the upper copy becomes the far-west and far-east lower copies, while the existing upper-left lower copy remains. Confirm three separated solid figures on the lower island. Keep both mirrors in their setup positions for the rest of the route.

  4. Spread the group at the north protrusion

    Move west until the two western copies bunch at the west shore. Move south, then east until that pair reaches the central circle’s column while the eastern copy stops near its right shore. Move north to bring the western pair onto the central north protrusion, one above the other. Move east again until the three figures occupy the protrusion’s east edge, the centre-right area and the far-right shelf. Compare this checkpoint before continuing.

    The three copies are separated across the north protrusion’s east edge, centre-right area and far-right shelf. This is the alignment checkpoint, not the finish.
    The three copies are separated across the north protrusion’s east edge, centre-right area and far-right shelf. This is the alignment checkpoint, not the finish. Enlarge image
  5. Clear the eastern shelf and form the southern row

    From the north-protrusion checkpoint, move west, south, east back towards the right shelf, then south. Stop and compare the picture: the two left-hand copies have reached the southern shore, but the rightmost copy is still on the raised eastern shelf. Move west until that rightmost copy leaves the shelf and is above the main island’s lower land, then move south to bring it onto the same bottom row as the other two. Compare the bottom-row picture before the final alignment.

    The two left copies are at the southern shore, but the rightmost copy is still on the raised eastern shelf. Move west off the shelf, then south to form the bottom row.
    The two left copies are at the southern shore, but the rightmost copy is still on the raised eastern shelf. Move west off the shelf, then south to form the bottom row. Enlarge image
  6. Align below the circles and finish

    From the pictured single bottom row, move west along the southern edge until each copy is directly below one gold circle. Move north together onto all three circles. The recording shows three occupied targets followed by the completion fade.

    All three copies have reached one southern row; move west until each is directly below its circle, then north.
    All three copies have reached one southern row; move west until each is directly below its circle, then north. Enlarge image
All three solid copies occupy the three gold circles after the shared northward move.
All three solid copies occupy the three gold circles after the shared northward move. Enlarge image

Check your result

Three solid copies occupy the three circles. The north-protrusion state and the southern row are intermediate checkpoints; the copies must still align with the three goal columns and move north.

If your attempt went wrong

If there are only two lower copies, check the return from the far-west light to the upper bar and the second double-reflection interaction. If three copies have the wrong spacing, compare the north-protrusion checkpoint, then repeat west–south–east–south. If the rightmost copy is still raised on the eastern shelf, move west off it and south to the bottom row before aligning below the circles.

Watch this room in the original recording ↗

Opens YouTube in a new tab. No video or third-party player loads here.

Source: Gamer Guru’s original Room 10 demonstration. Use directions relative to the board image and your game’s displayed mirror controls. Routes and completion signals were read from this October 2026 recording; its exact patch is unknown, and these are not personal current-build or r67255 tests. Hints and explanations by Sinking Star Hub. Report a layout mismatch.